Distance between Ulvapad and Ghanpur
The distance from Ulvapad to Ghanpur is 239 miles by road. Road takes approximately 4 hours and 34 minutes and goes through Singarayakonda, Tanguturu, Ongole, Miriyalguda, Suriapet and Jangaon.
| Shortest distance by air | 191 mi ✈️ |
| Car route length | 238.6 mi 🚗 |
| Driving time | 4 h 34 min |
| Fuel amount | 8.1 gal |
| Fuel cost | 31.9 USD |
| Point | Distance | Time | Fuel | |
| Ulvapad | 0 mi | 00 min | 0.0 gal | |
|
NH16 8 mi, 09 min
|
||||
| Singarayakonda | 8 mi | 09 min | 0.1 gal | |
|
NH16 6 mi, 07 min
|
||||
| Tanguturu | 15 mi | 17 min | 0.4 gal | |
|
NH16 12 mi, 13 min
|
||||
| Ongole | 27 mi | 31 min | 0.8 gal | |
|
NH16 9 mi, 09 min
|
||||
| Maddipadu | 35 mi | 40 min | 1.1 gal | |
|
NH16 7 mi, 08 min
|
||||
| Medarametla | 43 mi | 49 min | 1.4 gal | |
|
NH16 NH167A 93 mi, 1 h 46 min
|
||||
| Miriyalguda | 136 mi | 2 h 35 min | 4.5 gal | |
|
NH167 37 mi, 41 min
|
||||
| Suriapet | 173 mi | 3 h 16 min | 5.7 gal | |
|
NH365B 47 mi, 55 min
|
||||
| Jangaon | 220 mi | 4 h 12 min | 7.4 gal | |
|
NH365B NH163 19 mi, 21 min
|
||||
| Ghanpur | 239 mi | 4 h 34 min | 7.9 gal | |
Frequently Asked Questions
How much does it cost to drive from Ulvapad to Ghanpur?
Fuel cost: 31.9 USD
This fuel cost is calculated as: (Route length 238.6 mi) / (Fuel consumption 29.4 mpg) * (Fuel price 3.93 USD / gal)
You can adjust fuel consumption and fuel price here.
How long is a car ride from Ulvapad to Ghanpur?
Driving time: 4 h 34 min
This time is calculated for driving at the maximum permitted speed, taking into account traffic rules restrictions.
- 99 mi with a maximum speed 56 mph = 1 h 46 min
- 140 mi with a maximum speed 50 mph = 2 h 48 min
The calculated driving time does not take into account intermediate stops and traffic jams.
How far is Ulvapad to Ghanpur by land?
The distance between Ulvapad and Ghanpur is 238.6 mi by road.
Precise satellite coordinates of highways were used for this calculation. The start and finish points are the centers of Ulvapad and Ghanpur respectively.
How far is Ulvapad to Ghanpur by plane?
The shortest distance (air line, as the crow flies) between Ulvapad and Ghanpur is 190.8 mi.
This distance is calculated using the Haversine formula as a great-circle distance between two points on the surface of a sphere. The start and finish points are the centers of Ulvapad and Ghanpur respectively. Actual distance between airports may be different.
How many hours is Ulvapad from Ghanpur by plane?
Boeing 737 airliner needs 23 min to cover the distance of 191 mi at a cruising speed of 497 mph.
Small plane "Cessna 172" needs 1 h 23 min to flight this distance at average speed of 136 mph.
This time is approximate and do not take into account takeoff and landing times, airport location and other real world factors.
How long is a helicopter ride from Ulvapad to Ghanpur?
Fast helicopter "Eurocopter AS350" or "Hughes OH-6 Cayuse" need 1 h 16 min to cover the distance of 191 mi at a cruising speed of 149 mph.
Popular "Robinson R44" needs 1 h 27 min to flight this distance at average speed of 130 mph.
This time is approximate and do not take into account takeoff and landing times, aerodrome location and other real world factors.
What city is halfway between Ulvapad and Ghanpur?
The halfway point between Ulvapad and Ghanpur is Dachepalle. It is located about 1 mi from the exact midpoint by road.
The distance from Dachepalle to Ulvapad is 119 mi and driving will take about 2 h 14 min. The road between Dachepalle and Ghanpur has length 121 mi and will take approximately 2 h 20 min.
The other cities located close to halfway point:
Where is Ulvapad in relation to Ghanpur?
Ulvapad is located 191 mi south of Ghanpur.
Ulvapad has geographic coordinates: latitude 15.16032, longitude 80.00649.
Ghanpur has geographic coordinates: latitude 17.85206, longitude 79.37663.